Caswell Canada

This is an economical Reverse Osmosis unit that is compact in size, for situations that require less space and the benefit of being portable. On average, this unit will remove 94-98% of tap water contaminants.

It includes a TFC membrane, an IFCE inline carbon/sediment pre filter, a 3/4 inch garden hose adapter and 6 feet of yellow, blue and orange tubing. This unit can be run on ANY water system, well or city.

RO systems are offered in 10 Gallon Per Day and 35 Gallon Per Day sizes. GPD will vary based on your water conditions.

Specifications of the 10 Gallon Per Day Unit:

• Length: 14 1/2"
• Width: 5 1/2"
• Height: 3"
• Dry weight: 4.5 lbs
• Optimal input water temp: 70-77°F, 21-25°C
• Optimal PSI: 65
• Optimal Total Dissolved Solids: <200 ppm
• Input water type: Any house water system
• Membrane type: Thin Film Composite, TFC
• Rated Gallons Per Day: 10
• Waste to Product ratio: 4 to 1
• Inhibiting/Damaging tap water chemicals: Iron, Calcium, Magnesium, Heavy Sediment
• Prefilter media: IFCE; Inline 10µ, solid block carbon filter
• Post filter media: N/A
• Supplied input water adapter: GHF, ¾ standard thread
• See Connection Parts for optional adapters
• Tubing type: ¼ pressure tubing
• Filter change times: NOTE: change times are varied depending on the tap water conditions. Stated times are an average: TFC membrane: 3 to 5 years, IFCE: 6 months

Flush Kit

The FLUSH KIT enables the membrane to be flushed with pressurized water to help remove contaminate buildup and extend membrane life. This kit comes complete with all necessary fittings to hook up to the RO system. Both RO systems includes the Flush Kit.

TFC Membrane Filter Replacement

TFC Membranes will need to be replaced every 3-5 years.

IFCE Carbon Filter Replacement

IFCE Carbon filters will need to be replaced approximately every 6 months.

Float Valve Kit

The Float Valve Kit allows an RO to fill a reservoir to a desired level, then shut down water production completely. This kit works from pressure only, no electricity. Included within this kit is a pressure solenoid, float valve, check valve, a 1/8" elbow, a male 1/8" x 1/8" connector and 1 foot each of blue and orange tubing.

10 Gal/Day Capacity