Tin is a very commonly used metal for the protection of steel. It is used extensively in the food trade because of its non-toxic qualities. Tin is a bright, shiny material, and has excellent soldering capabilities, making it ideal for all electrical connection applications.
Caswell's Tin Plating kit will plate directly over, copper, steel, brass, bronze. Other 'difficult' metals such as pot metal, will require a coat of Flash Copper™ first.
Average thickness is typically 0.0002-3” (0.10” in 10 mins)
Setup involves mixing 2 quarts of battery acid into 3.5 quarts of distilled water, then adding one quart of Tin Concentrate and one pint of Tin Activator. Triple these quantities for the 5.25 gal kit.
The Caswell Tin Plating System is a stable bath, which deposits a leveled, brilliant plate with excellent soldering capabilities. It has a wide operating range in regard to concentration and operates well with low tin concentration.
|
1.75 Gallon Kit
- 2 x Tin anodes 4" x 8"
- 2 x 2 gal tank & lid
- 1 Quart x Tin Concentrate
- 1 Pint x Tin Activator
- 1 x 300W 110°F Heater (for plating)
- 1 x 300W 210°F Heater (for degreasing)
- 4 Gals SP Degreaser
- The Caswell Plating Manual
- Free Technical Support
|
5.25 Gallon Kit
- 2 x Tin anodes 4" x 8"
- 2 x 6 gal tank, lid & locking ring
- 3 Quarts x Tin Concentrate
- 3 Pints x Tin Activator
- 1 x 300W 110°F Heater (for plating)
- 1 x 300W 210°F Heater (for degreasing)
- 8 Gals SP Degreaser
- The Caswell Plating Manual
- Free Technical Support
|
 |
|
Copper Pipe for tank bar
Copper Wire to hang items
Small amount of electrical wire to make connections
Power Supply
Battery Acid
|
|
|
|
Cart is empty