Home :: BUFFING SUPPLIES :: Buffing & Polishing Kits :: MINI Wood and Acrylic Polishing Kit

MINI Wood and Acrylic Polishing Kit

MINI Wood and Acrylic Polishing Kit
SKU MWBC
Our price: CA$423.57
Qty

Low speed 900-3600 RPM Buffing Machine is ideally suited for polishing wood, acrylic, lacquered surfaces, plastics and more. 

Kit includes:

  • 6" 3/4HP Variable Speed Buffer 900-3600 RPM
  • 3 x 6" x 1/2"  Canton Flannel Wheel
  • 3 x 6" x 7/8"  Canton Flannel Wheel
  • 1 x Plastic Buffing Compound
  • 1 x Plastic-Glo Buffing Compound
  • 5 each 120, 240, 360 and 600 grit Wet and Dry Paper
  • Wheel Rake
  • Instructions

Instructions:

If the object to be polished has heavy scratches, start by sanding. Start with 120 grit sandpaper, used dry. Switch to a 240 grit paper, dry. Finish with the 400 grit paper, used wet. Grits as fine as 600 may be used. Always use a wooden or rubber sanding block (not supplied). When removing scratches be sure to sand an area larger than the scratch. Sand with a circular motion, and use a light touch and plenty of water when using paper wet.

Polishing with the buffer will bring the surface a high lustre. Start with the Plastic Buffing Compound (Fine), and then switch to the Plastic-Glo Buffing Compound (Ultra-Fine). Be careful not to apply too much pressure, or excessive heat may cause burning of the part. Dedicate a buffing wheel for each compound, to avoid cross-contamination and introducing scratches into your final polish.

The buffing machine features large diameter, extended shafts, allowing easy access of larger parts. Heavy duty cast iron base and frame. Precision machined shaft and lubricated bearings for longer life. Single phase motor. May be mounted to a bench, or for greater access, to the optional stand.

  • 3/4HP 900RPM - 3600RPM in 100 RPM intervals
  • 1/2" Shaft Diameter
  • 115V/7 Amps or 240V/5 Amps
  • 3 Year Warranty

 

: *
: *
: *