Home :: PLATING :: Commercial Plating Systems :: Triple Chrome Plating Kit - 15 Gal.

Triple Chrome Plating Kit - 15 Gal.

Triple Chrome Plating Kit - 15 Gal.
Our price: CA$14254.63


This kit has been especially designed for the smaller workshop requiring high quality Chrome plating facilities for small to medium sized parts. It is ideally suited to operate as a small business venture, plating automotive and motorcycle parts.

25 Amp Rectifier

Applications Of This Product
Start a chrome plating business
You Must Supply

Copper Pipe for tank bar

Copper Wire to hang items

Small amount of electrical wire to make connections

Additional Heater - aquarium heaters work well

Optional Rinse Tanks (or rinse over the plating tanks with a water bottle)

The kit is supplied with 2 rectifiers, the smaller one, a 25 amp capacity, is designed to operate the copper and nickel plating tanks, with a maximum capacity of approx 300 sq. inch surface area. 

Amperage requirements for copper and nickel plating are approximately 1 amp per 15 square inches of surface area.


250 Amp Rectifier

The larger rectifier, supplied by Aldonex Inc, is a 250 amp capacity, specifically designed to control the higher demands of the Chrome Plating tank.

Amperage requirements of chrome plating are 1+ amps per square inch of surface area.

The 6 tanks supplied are constructed of HDPE, a chemical resistant plastic. They come with a lid to ensure tanks are completely safe and sealed when not in use. Dimensions are:- 12"W X 24"L X 18"H


The kit comes with professional 2000W heaters. Three titanium heaters are included for the plating tanks, and an incoloy heater is included for the degreasing tank.

Nickel, Flash Copper™ and Chrome all plate at 110°F. Acid Copper plates at 70°F and should not require heating unless the bath is in a cold room. If so, you should consider purchasing a 2000W Titanium Heater.


The Kit Contains:-

  • 1 x 250 Amp Rectifer
  • 1 x 25 Amp Rectifier
  • 6 x 20 gal Plastic Plating tanks with lids
  • 2 x 18" x 20" Nickel Anodes and bandages
  • 2 x 18" x 20" Copper Anodes and bandages
  • 4 x 12" x 12" GP Plates
  • 4 x 12" x 12" Chrome Anodes
  • 10 Packs Nickel Crystals with Brightener (Makes 15 Gals)
  • 10 Packs Copper Crystals (Makes 15 Gals)
  • 10 x 1.5oz Copper Brightener A
  • 3 x 4oz Copper Brightener Part B
  • 10 Cans Chrome Crystals with Catalyst (Makes 15 Gals)
  • Flash Copper™ Part A - 20 Quarts
  • Flash Copper™ Part B - 5 Quarts
  • Flash Copper™ Part C - 5 Quarts
  • SP Degreaser 8 lb (makes 16 gals)
  • 6 Filter/Agitator Pumps (2 Each For Nickel, Copper & Flash Copper™ systems)
  • The Caswell Plating Manual
  • "How To" DVD
  • Fume Control Balls

Rectifiers have a 1 year limited warranty.

Shipped by Purolator.  Dangerous Goods Charge will be added to your order. Call for details.


: *
: *
: *