Bronze Anodizing Dye - 4oz

SKU: DYEBZ9

Bronze Anodizing Dye, 4 oz.

$26.11

In Stock
SKU: DYEBZ9 Category:

Bronze Anodizing Dye, 4 oz.

These professional quality anodizing dyes provide consistent, quality results. The same dyes are sold to professional anodizing shops all over the world. Each 4oz bottle of dye concentrate makes 2 Gallons.

 

Anodizing Color Wheel Each anodizing kit is supplied with a color wheel. Dyes can be mixed together to create a host of different colors. The dyes are in concentrated liquid form, a 4oz bottle makes up 2 gals of ready to use dye. To make up different colors, we suggest that you make up the colors to the correct dilution first, then take a quantity of each dye and blend them together.

These colors are approximate. The finish will normally have a more ‘metallic’ look, and will vary slightly depending on the alloy and surface preparation.

Procedure for Obtaining Dyed Anodize

Anodize the aluminum at 60-75°F for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. Use our Anodizing Kit.

After thorough rinsing, immerse the part in the dye at a temperature of 140°F for 15 minutes.

Finally, seal by hanging the part in a sealer bath for 15 minutes.

Note: All dyes are suitable for high temp and low temp sealants, except Grey BL and Yellow 4A, which should not be sealed using LT Sealer.

 

Weight 0.25 lbs