Home :: PLATING :: Zinc Plating (Zinc & Copy Cad) :: Yellow Chromate Solution 4oz

Yellow Chromate Solution 4oz

Yellow Chromate Solution 4oz
SKU YCHRC5G
Weight 3.00 lbs
Our price: CA$47.91
Qty
IRIDESCENT YELLOW CHROMATE 4oz bottle
After preparing the part to accept the process, the part is simply dipped into a solution for a few minutes. The zinc & the chromate react to form the new colors. To improve those older zinc (pot metal) castings, plate with a fresh zinc plate before chromating.
Steel parts that have previously been plated with zinc can be chromated with no further pretreatment. Zinc alloy die cast parts may be surface activated by immersion in a weak acid. Full operating instructions are in the manual.
Please review MSDS before using this product. 
msdsTECH SHEET
 
Yellow Chromated Carbs
An Example of Yellow Chromate On A Zinc Plated Carb

The YELLOW CHROMATE is a yellow/bronze iridescent finish on plated cadmium and zinc. Liquid concentrate is used at 0.5% to 3% by volume in water at 65° to 90°F. The finish has outstanding resistance to salt spray, greatly surpasses the normal 96 hour salt spray resistance specified for yellow chromates on zinc. It will withstand up to 200 hours salt spray. The deposit is a pleasing finish in itself. It is an excellent base for paint. The finish may be dyed to various colors.

4 fl oz bottle - makes 4 gallons

Contains Hazardous Goods.  Must be shipped via Purolator Ground.

OxidizerCarcinogenToxicCorrosive

Yellow Chromate Concentrate

Mix 1—2 oz with 1 Gal Distilled Water

Darker colors produced by adding more product

Parts must be immersed for up to 1 minute, depending on depth of color.

Rinse in fresh water to stop darkening process. Dry with hot air (hairdryer) Do not handle part until dried for 4 hours

YCHRC5G

WARNING: THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER

 

: *
: *
: *